Phonefix

The camera on your iPhone may experience malfunctions either due to hardware problems or because of incorrect settings configuration. In this article, you will learn about the steps to diagnose and resolve issues with your iPhone camera's software or hardware. How to fix an iPhone's camera when it's not working due to software issues? if you're experiencing issues with your iPhone camera, try the following steps to diagnose and fix the problem: test the camera using facetime. this is a quick way to check if there are issues with either the front or back camera. close the camera app. sometimes problems with the camera app can cause malfunctions. restart your iPhone. this will clear temporary memory errors. update your iPhone's ios software. the camera app is included in regular updates. reset your iPhone settings without erasing content. a reset may be needed to fix changes made to your settings by other apps or yourself. perform a factory reset. this is the last ...

Today, we received an iPhone 13 with a Wi-Fi issue. Sometimes the Wi-Fi isn't detected at all, or at other times, it has a very low signal. In this article, Phonefix 'll share a step-by-step guide on how to fix Wi-Fi issues on an iPhone 13.   Step 1: Diagnosing the Problem Disassemble the device and remove the motherboards from the housing Apply solder and flux to the 5G antenna to remove it Use solder wick and alcohol to clean the area Step 2: Separating the Motherboards Place the motherboard on the JC Aixun iHeater Pro Preheater at 220 degrees Celsius for approximately three and a half minutes Clean the traces from the upper layer motherboard, apply flux and solder all around the perimeter Use the solder wick to ensure that all the traces are clean and flat Check for missing traces using a multimeter on diode mode Step 3: Testing the Motherboards Repeat the procedure with the lower layer motherboard and then use alcohol to clean any remaining residue Use a power suppl...