Phonefix

Is your iPhone 12-14 Pro Max showing an annoying "Unknown Part" message after replacing the rear camera? Don't worry, we've got you covered! In this comprehensive guide, we'll walk you through the steps to fix this error without the need for any soldering. We at PHONEFIX will specifically focus on the iPhone 14 Pro Max model to provide you with clear instructions. Tools Required JC V1S Pro Programmer Rear Camera Repair Adaptor JC Tag-On Rear Camera Repair Flex Cable Step-by-Step Instructions Step 1: Preparation and Connection Ensure that the JC V1S Pro programmer is adequately powered before proceeding. Adjust the automatic shutdown time settings on the JC V1S Pro to an appropriate duration. Keep the JC V1S Pro connected to the internet throughout the process. Conn...

Your iPhone 12 won't turn on by holding the button like it usually does. Don't worry,  I will show you 5 ways to fix iPhone 12 won't turn on issue within half-hour. You can follow this Phonefix blog to fix iPhone won't turn on issue. 1. Firmware Crash If your iPhone stops powering on for no apparent reason, i.e. you didn't drop it, expose it to water, or sustain other damage to it since it last turned on, the most likely culprit is a firmware crash. You'll need to perform a forced restart to get your phone out of a bad firmware loop, which you can do by following these steps: Press and immediately release the volume up button. Press and immediately release the volume down button. Press and hold the power button. The apple logo should show up after around 10 seconds—once it does, release the power button. Note that these button presses must be performed in quick succession. Additionally, if your phone does not turn on as expected, you should try char...