A Start-To-Finish Guide To 15W Electric Foam Cutter Pen
Bladed implements like knives, box cutters, precision blades (like
X-acto knives) or hacksaws are great for cutting through styrofoam. Today, I would like to share you a professional Electric Foam Cutter Pen. 
The
cutting is made by electric heat, not by force. The heater tube is
acerose, high-quality stainless steel material is not easy to rust. It is very convenient to cut foam/woven bag/film bag.
It comes with five different needles, 5cm/10cm/15cm/20cm/25cm cutting pen, easy to replace. It is easy to cut art ad curve of foam, and low pressure use, very safe.
The cutter pen heat up quickly, and the tube will reach 200°C within 10 seconds.
Materials that can only be cut, engraved, and dug holes: pearl cotton, foam board, benzene board, KT board, thin cloth, woven bag, stretch film and these materials.
2. Powered by batteries within 12v
3. 18650 lithium battery pack power supply
It is not recommended to use more than 9v for a long time, which will affect the life of the heating wire
Not recommended for prolonged use in redness
More practical tools, subscribe the PHONEFIX blog. You can also post your thoughts and opinions in the comments box.
It comes with five different needles, 5cm/10cm/15cm/20cm/25cm cutting pen, easy to replace. It is easy to cut art ad curve of foam, and low pressure use, very safe.
The cutter pen heat up quickly, and the tube will reach 200°C within 10 seconds.
What material can be cut?
This electric heating pen is a hot melt cutting, that is, melting cutting. Due to the limited temperature, it can only cut soft materials with low temperature.Materials that can only be cut, engraved, and dug holes: pearl cotton, foam board, benzene board, KT board, thin cloth, woven bag, stretch film and these materials.
How to Power the Cutting Pen:
1. Use a power charger within 6-12v, with an amperage of more than 2A2. Powered by batteries within 12v
3. 18650 lithium battery pack power supply
It is not recommended to use more than 9v for a long time, which will affect the life of the heating wire
Not recommended for prolonged use in redness
What should I pay attention to when carving hollow cutting?
The cutting principle is the principle of heating to melt the material. It is not a sharp cutting blade, so it cannot be cut with force. You have to wait for the material to melt and slowly feed the knife to cut. If you use force, the knife tube will be broken and bent.More practical tools, subscribe the PHONEFIX blog. You can also post your thoughts and opinions in the comments box.
Comments
Post a Comment