Things To Consider Before Purchasing A Hot Air Rework Station or soldering station
Before Purchasing A Hot Air Rework Station or soldering station, you need Consider the following 5 points.
1. Heat up time
The quick heat-up time makes sure you do not waste much time warming up. Also, it is advisable to look for a hot air rework station that comes with faster heat recovery ability.
2. Temperature control
The minimum temperature found in most hot air rework stations is 100ºC. It allows you to use the rework station with heat shrink. The maximum temperature can be up to 450℃. The maximum temperature of 350ºC is considered satisfactory for most projects.
3. Nozzle
The tiny nozzles are beneficial for focusing air over a small chip. On the other hand, bigger nozzles are beneficial for drenching a big area like huge heat pad sinks. The facility of interchangeable nozzles is available in decent quality hot air rework stations.
4. Airflow
The minimum specification for airflow is at least 20 liters/minute. In addition to the efficiency of airflow, it is important to check whether the airflow rate is adjustable or not.
The cheap quality rework stations do not provide a facility to automatically adjust the airflow. With such tools, you have to manually guess a lower temperature whenever you want to adjust the airflow.
Consequently, it leads to errors and decrement in speed. The benefit of high-quality hot air rework stations is accurate airflow and reliability.
5. Protection
The overheating protection is the best feature to consider when it comes to safety. You must ensure that it has an ESD safe design for protection.
I2C 2SEN Micro Nano Soldering Station is a good choice for you, and it comes with T245-A general purpose soldering handle and 3pcs C245 soldering tips, achieves Fast 1S Rapid Heating.
Comments
Post a Comment