Replace iPhone XR Back Glass

Today we would like to show you how to replace the rear glass and make sure the keep iPhone XR rear glass thickness as same as the original.

If you have broken the rear of your iPhone XR. Don’t worry! We can remove the rear housing of your iPhone and replace it with a brand new part with the help of  laser separating machine.

How to replace a iPhone XR Back Glass?

1. Do Laser treatment on the Back Glass

After geting the state of 8.37mm thickness, put the whole phone into Blue Light Laser Separation Machine for removing the back glass. The machine can reduce the tear down difficulty of iPhone. 

2. Back Glass Removing

The back glass is very easy to be separated after doing laser. Use a blade and a sharp knife to remove the back glass.

3. Cleaning the Black Objects

Before cleaning black things. We should clean the edge of the panel with a small spatula.

Use a clean cloth and isopropyl alcohol to clean the black objects.

4. New Glue Adding

These glues are really useful because they are the key point to keep the same thickness as the original one.


Add new glue around the phone body and blank place without glue.

5. Install A New Back Glass

Stick a new back glass on the phone and use four Clamp Fixture to apply pressure.

The replacement process is complete. Measure the thickness of the phone with Metal Straight Ruler, The final result shows this phone is looking as perfect as an original phone.

Besides the laser separating machine, China Phonefix ALSO provides the TBK-308A Laminating Machine, bubble removal machine, flex cable bonding machine, freezer separator, hot air gun soldering iron, consumable, etc.