iPhone X/8/7/6/5 Shows Vertical White Line Repair
If you are confused about iPhone X/8/7/6/5 Shows Vertical White Line, you can read this guidance. I will show you the reasons that cause this problem and what to do when this error occurs. Take iPhone X as an example.
Separate the screen display
1. Use 3D screwdrivers
to remove the iPhone screws at the bottom of the screen, and then put
iPhone X on the CPB screen separator for heating.
2. Use LCD
pry tool to open the iPhone X screen, remove the iPhone display
assembly.
Test
1. Install a new iPhone X display assembly, and then turn on the iPhone X
to test, but the problem is still the same, now we confirmed it's not
the problem of the iPhone X screen.
2. Disassemble the iPhone X
again, remove the iPhone X display assembly, disconnect the iPhone
battery, and then remove the iPhone X motherboard.
3. First measure the diode data for iPhone display connector by digital multimeter, the diode data measured is normal.
4. Connect the iPhone X motherboard to iPower DC power cable, and then trigger the iPhone, the boot current measured is normal.
5. Use digital multimeter to measure the working voltage of the iPhone screen, the value measured all are normal, now we can confirmed it's not the problem of the iPhone display circuit.
Based on our repair experience, this problem may be caused by PP_GPU_SRAM circuit or iPhone CPU.
Repair
1. Signed in to ZXW online account to check iPhone X schematic diagram and bitmap, and then we need to measure those related components one by one.
2. Put iPhone X motherboard on the SST12A heating station to separate the iPhone X motherboard, and then use digital multimeter to measure the iPhone logic board, the data measured is normal.
Now use Qianli iSocket test jig to measure the iPhone X, the iPhone X screen displays normally and it can be turned on properly.
Comments
Post a Comment